Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: mr ICE man on 20 September 2009, 06:24:11

Title: cruise controll
Post by: mr ICE man on 20 September 2009, 06:24:11

had a faulty stalk when i bought the car main beam kept flashing cruise didnt,bought a new talk with cruise controll same as i had.but cruise controll doesnt wotk!is there a fuse that might have blown?all is connected up correctl,both sets of wires.pretty good with wiring etc so any help would be appreciated!

Title: Re: cruise controll
Post by: tunnie on 20 September 2009, 10:29:08

how many wires on the leccy connector for cruise on the replacement stalk?

Title: Re: cruise controll
Post by: mr ICE man on 20 September 2009, 20:05:18

has 2 wires seperate from other connecter

Title: Re: cruise controll
Post by: TheBoy on 20 September 2009, 21:26:08

You haven't fitted a 4 wire stalk to your car - 2.5td engine needs 2 wire stalk.

Title: Re: cruise controll
Post by: mr ICE man on 22 September 2009, 20:49:35

is def a 2 wire stalk and connecter but not working

Title: Re: cruise controll
Post by: TheBoy on 22 September 2009, 21:18:19

Quote

is def a 2 wire stalk and connecter but not working

check functionality by sticking meter across wires - the switches are in a resistor network.

I dont had td stalk to give you correct readings

Title: Re: cruise controll
Post by: zirk on 24 September 2009, 11:35:50

Quote

Quote

is def a 2 wire stalk and connecter but not working

check functionality by sticking meter across wires - the switches are in a resistor network.

I dont had td stalk to give you correct readings

Across the pins (disconnected).

Normal (No Cruise), 670 Ohm
Cruise On / Speed Increase, 67 Ohm
Resume / Speed Decrease, 162 Ohm
Reset / Stop, 1.6K Ohm

Chris.  :y