Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: RobG on 27 September 2009, 20:07:36
-
Anyone know the colour wire that illuminates the switch when sidelights are activated and also the 0v (earth). Or has anyone got an exploded view of the pin outs. TIA :) :)
-
Anyone know the colour wire that illuminates the switch when sidelights are activated and also the 0v (earth). Or has anyone got an exploded view of the pin outs. TIA :) :)
They're always lit aren't they? :-/ Pretty sure they are ....... & I ain't going outside in the dark to check! ;) ;) ;) :y
-
They are not illuminated on mine , I did try just swapping the switch over with one that is and it did not work so I think the switches are different :y
-
Anyone know the colour wire that illuminates the switch when sidelights are activated and also the 0v (earth). Or has anyone got an exploded view of the pin outs. TIA :) :)
They're always lit aren't they? :-/ Pretty sure they are ....... & I ain't going outside in the dark to check! ;) ;) ;) :y
The Boogey man will wait for you Haa Haaa Haaaaa
Lol [smiley=evil.gif] [smiley=evil.gif] [smiley=evil.gif]
-
On the facelift the switches illuminate with the sidelights. When ign. switched off and key removed, window operation and switch illumination remain active until driver`s door has been opened.
In answer to my posted question, managed to suss it out. Pin #4 on main switch (red cable) is perm. live, pin #22 activates the illumination (grey/yellow trace). On pass door and both rears illumination pin is the grey/yellow trace wire :y
-
Sorry just read this again ,I was thinking of the mirror adjusting switch on the door :-[
-
On the pre & mini facelift models the Haynes manual has full wiring diagrams including wiring colours.
However, its very small print (I got mine copied to A3 size) and the wire colours are abbreviated into German - but there is a key at the front of the section.
Should give you everything you need.
HTH