Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: kjf7 on 01 October 2009, 22:28:33

Title: instaling carin sat nave into pre face lift
Post by: kjf7 on 01 October 2009, 22:28:33

as above i tryed to click on the link in maintenence guide on what todo if plug in passanger footwell was'nt there and it does'nt seem to work it says page is missing can anyone help cheers :-?

Title: Re: instaling carin sat nave into pre face lift
Post by: I_want_an_Omega on 01 October 2009, 22:35:18

Basically you need to be able to pick up the following signals to connect to Carin via the harness connector:

Constant 12v
Ignition switched 12
Illumination
Lights on
Reverse
Speed

The ground connection is made separately.

I might have got a connector with a bit of wire on if you need it that will plug into the Carin harness.

I've also got a spare system if you havn't got one yet.

HTH ........ Rob

PS - look @ location -  ;)

Title: Re: instaling carin sat nave into pre face lift
Post by: kjf7 on 01 October 2009, 22:40:02

cheers mucker is this something you could do then :y

Title: Re: instaling carin sat nave into pre face lift
Post by: I_want_an_Omega on 01 October 2009, 22:42:57

Certainly - PM me and we will take it from there ...

 ;)