Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: steve-o2.5 on 11 October 2009, 22:37:28

Title: door lock
Post by: steve-o2.5 on 11 October 2009, 22:37:28

hi, drivers door don't work with CL. read all the posts very hopeful had the card off yesterday nothing obvious jamming lock etc.in touch with Loo Knee to get new motor but just noticed that front 'n rear indicators on drivers side don't light up when press CL! is this just indicating a fault on that side or is something else!!!!!!! :-?

Title: Re: door lock
Post by: rustym95 on 12 October 2009, 00:12:14

would think you have a fuse gone, in mine there is a fuse for the left and one for the right, would check them out think they were a 10amp fuse or a 15amp cannot remember of hand. :y

Title: Re: door lock
Post by: steve-o2.5 on 13 October 2009, 22:02:36

fuses ok! 20 amp by the way.
if anyone has a servo motor for sale please pm. cheers :y

Title: Re: door lock
Post by: rustym95 on 14 October 2009, 01:08:29

just had a thort, disconnect th battery lev it off for 5-10min then reconnect it, did that on mine when my door not working, and it worked after. :y dont know about the lights as trying to find what relays they are as some on removed them before got the car. :y

Title: Re: door lock
Post by: Kevin Wood on 14 October 2009, 17:06:49

The normal problem is the microswitch built into the locking motor.

Kevin

Title: Re: door lock
Post by: steve-o2.5 on 14 October 2009, 21:04:21

thank you thank you thank you! have to wait till sat to do the do, cos work always get in the way >:(