Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: I_want_an_Omega on 17 October 2009, 18:06:28

Title: Interior light: Mini facelift versions
Post by: I_want_an_Omega on 17 October 2009, 18:06:28

My mini facelift has a standard interior light with a 4 pin connector.

I thought it would be good to get one from a CCRT700 car with space for the built in mic. I'd then put my Parrot mic into the space and not have it dangling so to speak.

So, I got a new light and was horrified to see that its got a 9 pin connector on it not a 4 as I was expecting.

I havn't even tried to make my 4 pin connecter plug into the 9 pin one.

Any ideas or do I try and get a bit of plug in loom from a suitable car and splice away?

Title: Re: Interior light: Mini facelift versions
Post by: TheBoy on 17 October 2009, 20:03:53

Easy enough to modify, but easier if you have a short length of loom from doner ;D

Title: Re: Interior light: Mini facelift versions
Post by: I_want_an_Omega on 17 October 2009, 20:07:30

Thats what I thought ,,,,,,,,,,,,,,

Title: Re: Interior light: Mini facelift versions
Post by: Andy B on 17 October 2009, 20:11:39

Quote

..... a short length of loom from doner ;D

 :-?  :-? Yuk!! It'd be all greasy & horrible!

 ::)  ::)  ::)  ::)  ;)

Title: Re: Interior light: Mini facelift versions
Post by: I_want_an_Omega on 17 October 2009, 20:19:20

oops ........... point well made and dn't bear thinking about really  :D :D :D :D :D