Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: sjeden on 30 November 2009, 13:32:07

Title: Aftermarket HU && AMP Wiring.
Post by: sjeden on 30 November 2009, 13:32:07

Hey,

im new to the omega, i just bought an aftermarket HU to replace the standard HU, im just wondering how to wire the amp and sub i have.

I have a corsa which just unscrews by a few torx bits here and there. What is the omega like for access places to run the cables.

is there a tutorial anywhere? :)

Thanks alot :D

Title: Re: Aftermarket HU && AMP Wiring.
Post by: mathewst on 30 November 2009, 13:40:09

You have a how to in maintenance section

Title: Re: Aftermarket HU && AMP Wiring.
Post by: sjeden on 30 November 2009, 13:59:07

thats bits only for the power, how about for running the audio cables?

my sub has an inbuilt amp prebuilt onto the box

Title: Re: Aftermarket HU && AMP Wiring.
Post by: mathewst on 30 November 2009, 14:37:20

What's the difference??
You run the cables for amp signal the same way, except the front part which would probably be best to run behind glovebox

Title: Re: Aftermarket HU && AMP Wiring.
Post by: sjeden on 30 November 2009, 14:38:28

does the glovebox come out so you can get behind it?

:D

Title: Re: Aftermarket HU && AMP Wiring.
Post by: mathewst on 30 November 2009, 15:00:43

You also have the how to called "replacing glovebox handle" in maintenance section so check that out