Omega Owners Forum
		Omega Help Area => Omega Electrical and Audio Help => Topic started by: olzz on 17 January 2010, 17:29:38
		
			
			- 
				Hey all!
 
 I need help for finding the answer for the loose connector under the bonnet. There is 2 pin connector hanging, 2days i have been searching the answer plug. It comes through the cabin fire-wall together with the coolant tank level sensor wire. Please see the pictures below:
 http://img51.imageshack.us/i/imgp7563.jpg/
 
 http://img189.imageshack.us/i/imgp7566v.jpg/
 
 PS! The car is with left steering configuration :)
 
 
 Could anybody check his/her Omega 2,2 bensin, where this connector is connected!
 
 Thank you in advance!!
 
 
- 
				Aux coolant pump?
 
 Put a meter on the contacts, if you get 12v when the ignition is on then thats what it will most likely be
- 
				looks like it has never been used, mine not used as well tyed up with cap on it and put in with the alarm horn.
			
- 
				Voltage measurement done. No power coming, when ignition is on...
 
 Most probably it is Omega standard wiring kit, and not used with  current engine
- 
				Mate, I know from other forums in my country (clubopel.com) that it is for testing the HID xenon system.