Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: unlucky mark mv6 on 30 January 2010, 17:12:49
-
Will my mv6 facelift be pre-wired to take an auto dip mirror off an elite,and if so will it be just plug and play. :y
-
Unlikely, my CDX facelift wasn`t. If you`re not bothered about the reverse facility it`s only two wires to splice from the roof light connector
-
Unlikely, my CDX facelift wasn`t. If you`re not bothered about the reverse facility it`s only two wires to splice from the roof light connector
Thats very unusual rob being a cdx,as it virtually has everything the elite has.Sure you hadent missed a wiring plug in the headlining.Would really like everything to work as it should,so what could i do to make the reverse facility work,does it mean running wires to reverse switch or lights?. :-/
-
Running a wire down to the driver`s kick panel. When I fitted mine I didn`t see the need for it. You`ve still got decent rear view vision when mirror is in anti-glare mode so couldn`t be bothered to faff about getting a wire down there
-
This is probably a dumb question, but can i ask, what does the reverse function do? I ask, because i have a heavily tinted rear screen, which i am considering removing in my elite, so obviously, at the mo, my mirror does nothing.
-
When reverse is selected, it removes the auto dip so you can clearly see out the back :)
-
Will my mv6 facelift be pre-wired to take an auto dip mirror off an elite,and if so will it be just plug and play. :y
No and no