Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: mr ICE man on 07 February 2010, 08:54:00
-
Hi all I bought a full leather interior and it has all elec seats mine only has heated and elec up and down do I need more connections and where do I get them or are they plug n play so to speak?the seats are off the same year just off an elite 1998.thanks all! :D
-
Did you get your leaky rad fixed? And were any of those numbers any use?
:-?
-
Hi all I bought a full leather interior and it has all elec seats mine only has heated and elec up and down do I need more connections and where do I get them or are they plug n play so to speak?the seats are off the same year just off an elite 1998.thanks all! :D
Have a read of this http://www.omegaowners.com/forum/YaBB.pl?num=1234703022
-
Hi all I bought a full leather interior and it has all elec seats mine only has heated and elec up and down do I need more connections and where do I get them or are they plug n play so to speak?the seats are off the same year just off an elite 1998.thanks all! :D
For simple operation of seat only, only need to provide 12v and 0v to seat (plus the seat heaters, and obviously the side airbags if your airbag ECU expects to see them)
Memory of mirrors needs replacement mirrors and a shitload of wiring
-
......and a shitload of wiring
Is that the same as lots? ::) ::) ::) :y :y
-
......and a shitload of wiring
Is that the same as lots? ::) ::) ::) :y :y
One should apologise for ones langauge, would one agree ;D
Of course, the correct terminology one should have used is "and a challenging amount of wiring one would need to performed should one wish to receive the full experience of the memory functions in one's car"
-
......and a shitload of wiring
Is that the same as lots? ::) ::) ::) :y :y
One should apologise for ones langauge, would one agree ;D
Of course, the correct terminology one should have used is "and a challenging amount of wiring one would need to performed should one wish to receive the full experience of the memory functions in one's car"
;D ;D ;D ;D :y
-
Guess I won't be using memory then!thanks for all tour help guys.
Dave from dnd I would like to say a big thanks to you,they said try using another layer of liquid metal and it worked a treat!thanks mate,hope I can return the favour at some point! :D
-
Guess I won't be using memory then!thanks for all tour help guys.
Dave from dnd I would like to say a big thanks to you,they said try using another layer of liquid metal and it worked a treat!thanks mate,hope I can return the favour at some point! :D
No worries - glad it got you home :y
-
Guess I won't be using memory then!thanks for all tour help guys.
Dave from dnd I would like to say a big thanks to you,they said try using another layer of liquid metal and it worked a treat!thanks mate,hope I can return the favour at some point! :D
The seat memory will still work, just not the mirror memory :y
-
Thanks all for your help new interior looks sweet and all works great!!!just need some cream door handles now!thanks guys
-
......and a shitload of wiring
Is that the same as lots? ::) ::) ::) :y :y
One should apologise for ones langauge, would one agree ;D
Of course, the correct terminology one should have used is "and a challenging amount of wiring one would need to performed should one wish to receive the full experience of the memory functions in one's car"
So shitloads then? ;D ;D
-
Not too much was pretty easy.good at electrics just not machanical bits!!!!
-
......and a shitload of wiring
Is that the same as lots? ::) ::) ::) :y :y
One should apologise for ones langauge, would one agree ;D
Of course, the correct terminology one should have used is "and a challenging amount of wiring one would need to performed should one wish to receive the full experience of the memory functions in one's car"
So shitloads then? ;D ;D
Couldn`t have put it better myself ;D ;D ;D
-
Not too much was pretty easy.good at electrics just not machanical bits!!!!
Presume you haven't done the mirror memory then. Or wired up the diagnstics interface ::)
-
No not done that!just motors work and heated part when I press mem buttons just moves the motor back!?how do I wire the memory up? Would like to an don't mind lots of wiring! :)
-
No not done that!just motors work and heated part when I press mem buttons just moves the motor back!?how do I wire the memory up? Would like to an don't mind lots of wiring! :)
You need memory mirrors (both doors, and interior 'autodip' type mirror). And all the wiring in between. To do that, and it is a lot of wiring, you'll have to treat yourself to a Haynes Book of 'dangle berries', and ponder over the wiring diagrams whilst performing your daily rituals ;D
-
Mmmmmm nice!might just leave the memory then!!!
-
Mmmmmm nice!might just leave the memory then!!!
seat memory will still work :y
but i miss the memory mirrors I had on the old tractor....
-
How do you get the memory to work?I wired it up how the diagram showed!and all they do is move the seat back till you let them go.am I missing something?
-
How do you get the memory to work?I wired it up how the diagram showed!and all they do is move the seat back till you let them go.am I missing something?
set position, then press M and 1 2 or 3 together to store.
To return to that stored setting, just press and hold 1 2 or 3 as appropriate until seat stops moving
-
Sweet I'm going to have a play after gadget show! :o
-
Sweet I'm going to have a play after gadget show! :o
Yeah, Suzie has that effect on me also :-X
;D ;D
-
Sweet I'm going to have a play after gadget show! :o
Yeah, Suzie has that effect on me also :-X
;D ;D
;D ;D ;D ;D :y
-
Sweet I'm going to have a play after gadget show! :o
Yeah, Suzie has that effect on me also :-X
;D ;D
She's let herself go a bit...
It could be a great programme, but all 4 presenters are retards
-
i love your honesty!!!!i would enjoy there job tho!!