Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Stian22i on 17 February 2010, 09:56:42

Title: Siemens NCDC 2015 problem
Post by: Stian22i on 17 February 2010, 09:56:42

Hi. I have a Omega 2.5dti facelift with a siemens 2015 installed. But i have trouble with the cd and navigation slot. It won't read any cd's. Not even the original navigation cd.

Anything i do with this?
I have a original CD 70 Navi, can i use somthing from that to fix the 2015. Or is there a way to use the CD70 i my omega?

Greetings from Norway.
Stian

Title: Re: Siemens NCDC 2015 problem
Post by: tunnie on 17 February 2010, 10:16:30

have you been using CD-R's in both the changer and single disc lot? These tend to nacker the lasers. You need to get it repaired, DaveDND a member here does repairs, not sure what postage would be though from Norway  :-/

Title: Re: Siemens NCDC 2015 problem
Post by: Stian22i on 17 February 2010, 10:19:56

Yes i have. Possible to switch to the laser from the CD70?

Title: Re: Siemens NCDC 2015 problem
Post by: tunnie on 17 February 2010, 10:22:17

Quote

Yes i have. Possible to switch to the laser from the CD70?

Don't know, one of the electronic wizards will be along shortly  :)

Title: Re: Siemens NCDC 2015 problem
Post by: Dave DND on 17 February 2010, 14:00:15

Quote

Yes i have. Possible to switch to the laser from the CD70?

Not sure on that one - gut feeling is probably not.

Title: Re: Siemens NCDC 2015 problem
Post by: Stian22i on 17 February 2010, 14:28:49

Ok. Do you know where to get a new laser? Is it a difficult job to change?

So the CD 70 is useless to an omega? It's a different wirering system than the 2015 isn't it?

Title: Re: Siemens NCDC 2015 problem
Post by: TheBoy on 17 February 2010, 19:00:58

CDRs knacker the laser.  Parts are virtually impossible to get now.

CD70 uses different laser. CD70 cannot be fitted to Omega (believe me, I've tried)

Title: Re: Siemens NCDC 2015 problem
Post by: zYx on 17 February 2010, 23:33:51

B4 you do anything, try to take it out and clean the laser. It's been several years now, and lenses needs cleaning sometimes. I reckon it should be fine.

Title: Re: Siemens NCDC 2015 problem
Post by: Stian22i on 18 February 2010, 08:50:02

Yes, should try that. Tried to get a cleaning cd in but with no success :P

Title: Re: Siemens NCDC 2015 problem
Post by: bigmac on 18 February 2010, 17:41:14

Quote

CDRs knacker the laser.  Parts are virtually impossible to get now.

CD70 uses different laser. CD70 cannot be fitted to Omega (believe me, I've tried)

Pm me mate if you can fit it into a vectra b i'm sure you can in an omega ;)