Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: MartinP on 17 February 2010, 23:01:23

Title: Diagnostic socket wiring
Post by: MartinP on 17 February 2010, 23:01:23

I have looked at the wiring diagram in the Haynes manual and I can not see the diagnostic socket.

As some people are aware, I have a 3.0 ltr engine in a kit car, the ECU & fuel relays are still connected and will be running in it's standard form.

Is the any mileage in having the diagnostic socket wired up?

Which wires come from the socket?

I have 2 multi pin plugs connected to the engine, Brown & white.

I have traced & labelled most of the wires to/from various sensors.

thoughts & suggestions

Martin

Title: Re: Diagnostic socket wiring
Post by: rustym95 on 18 February 2010, 12:41:59

would think it be easyer to just get a complete wiring loom think some scrapys charge about £10-20, some even have them in on a shelf.

Title: Re: Diagnostic socket wiring
Post by: Dave DND on 18 February 2010, 13:13:05

I`d certainly wire it up -

Half the fun of kit cars is the tinkering about, and the socket would make some of it a little easier

 :-?

Title: Re: Diagnostic socket wiring
Post by: TheBoy on 18 February 2010, 18:20:16

I'd wire it up :). 0v, 12v and the diag line to ecu

Title: Re: Diagnostic socket wiring
Post by: Edd on 18 February 2010, 18:53:41

not sure if this is any help for you

http://pinoutsguide.com/pin_CarElectronics.shtml

Title: Re: Diagnostic socket wiring
Post by: TheBoy on 18 February 2010, 19:07:09

Quote

not sure if this is any help for you

http://pinoutsguide.com/pin_CarElectronics.shtml

MartinP is fitting engine to kit car, so doesn't need to go to town on it :y

He just needs 0v (4 and 5)
12v (16 I think)
Motoronic diags (7)
Flash diags (6)

Title: Re: Diagnostic socket wiring
Post by: MartinP on 18 February 2010, 19:18:40

Quote

Quote

not sure if this is any help for you

http://pinoutsguide.com/pin_CarElectronics.shtml

MartinP is fitting engine to kit car, so doesn't need to go to town on it :y

He just needs 0v (4 and 5)
12v (16 I think)
Motoronic diags (7)
Flash diags (6)

thanks Jamie, after reading Edd's post I was going to ask if it was pins 4,7 & 16

missed pin 6


Anybody got a spare socket?


Martin

Title: Re: Diagnostic socket wiring
Post by: Edd on 18 February 2010, 19:23:16

looks like a trip to the breakers with a pair of side cutters

Title: Re: Diagnostic socket wiring
Post by: MartinP on 18 February 2010, 22:27:08

Quote

looks like a trip to the breakers with a pair of side cutters

Thanks for the link.

There are a few breakers on here so may not have to climb up a pile of cars.  ;) ;)

Martin

Title: Re: Diagnostic socket wiring
Post by: TheBoy on 19 February 2010, 08:41:19

Quote

Quote

looks like a trip to the breakers with a pair of side cutters

Thanks for the link.

There are a few breakers on here so may not have to climb up a pile of cars.  ;) ;)

Martin

Pop in a wanted ad,

Title: Re: Diagnostic socket wiring
Post by: MartinP on 19 February 2010, 21:53:02

Quote

Quote

Quote

looks like a trip to the breakers with a pair of side cutters

Thanks for the link.

There are a few breakers on here so may not have to climb up a pile of cars.  ;) ;)

Martin

Pop in a wanted ad,

Dealt with by PM  :y

Martin