Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: TaxiManDan on 12 February 2010, 01:59:34

Title: 2.6 v6
Post by: TaxiManDan on 12 February 2010, 01:59:34

hi, i took my car to vaux stealer today to get my engine idle ajusted as its to low and the car shakes on tick over, i took it in and when i went to collect it they said that the 2.6 v6 cant be ajusted via tech2 bearing in mind its a 2001 cdx fly by wire model. they also didnt seem interested in helping me sort this and basiclly said they were not sure how to sort this problem out, can anyone verfy tech2 cannot sort this and if so how can I ?

thanks

Title: Re: 2.6 v6
Post by: TheBoy on 12 February 2010, 09:23:49

Is the tickover at 450rpm (ECO ON) or 550-600rpm (ECO OFF)?

If so, that is correct.

Is the idle stable?

Title: Re: 2.6 v6
Post by: TaxiManDan on 17 February 2010, 20:57:19

yea its at that but very lumpy

Title: Re: 2.6 v6
Post by: Welung666 on 17 February 2010, 21:10:09

Any oil in the plugwells? Air filter clean?

Title: Re: 2.6 v6
Post by: TaxiManDan on 18 February 2010, 02:54:41

ill have a look i know the cam cover is leaking and i have never changed the plugs

Title: Re: 2.6 v6
Post by: Kevin Wood on 18 February 2010, 10:09:46

Might be worth doing a pedal test and checking for codes. (something the dealer should have done while they had a Tech 2 on it). Any serious misfire will result in a trouble code on these ECUs.

Kevin

Title: Re: 2.6 v6
Post by: denisaok on 10 April 2010, 21:06:50

Hi I had a similar fault and was told that it was on the coil packs did a test but it turned out to be the air flow meter