Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Hannah Judes Dad on 23 April 2010, 14:39:56

Title: Dis pack firing order please
Post by: Hannah Judes Dad on 23 April 2010, 14:39:56
Hi there I am sure someone on here in the past put up a picture of the firing order on the dis pack but I can't seem to find it.Yes you guessed it I didn't make a note of it when I was taking off the old leads.(I wiil learn one day) it's for the V6 before anyone puts up a four pot picture.Thanks in advance guys and girls.  :y
Title: Re: Dis pack firing order please
Post by: Marks DTM Calib on 23 April 2010, 14:44:50
The firing order is 1-2-3-4-5-6

The connections are:

5-3-1
2-6-4

Title: Re: Dis pack firing order please
Post by: Hannah Judes Dad on 23 April 2010, 14:50:03
Quote
The firing order is 1-2-3-4-5-6

The connections are:

5-3-1
2-6-4


Thanks for the info MarkDTM is the electrical plug at the 5-2 end or the 1-4 end(I know I am a numpty for not paying attention in the firstplace)
Title: Re: Dis pack firing order please
Post by: Marks DTM Calib on 23 April 2010, 14:53:49
Quote
Quote
The firing order is 1-2-3-4-5-6

The connections are:

5-3-1
2-6-4


Thanks for the info MarkDTM is the electrical plug at the 5-2 end or the 1-4 end(I know I am a numpty for not paying attention in the firstplace)

The 5-2 end...I have drawn it as if you are looking from the front of the car (as you will be)  :y
Title: Re: Dis pack firing order please
Post by: duggs on 23 April 2010, 14:56:18
Funny thing ! I'm looking at a Dis pack right now.

Tis the old one, used as a paper weight on my desk !
Title: Re: Dis pack firing order please
Post by: Hannah Judes Dad on 23 April 2010, 14:57:05
You're a star,lets hope it all goes back together and works again.I'll find out in a bit and let you all know.(fingers crossed)  :y
Title: Re: Dis pack firing order please
Post by: Hannah Judes Dad on 23 April 2010, 23:17:06
Sorry for the delay in putting up the results but I am glad to announce I have changed my first set of ht leads on an Omega.Amazingly I didn't lose any skin from my hands and it all went back together again.I am doubly smug with myself for attempting the job (with success) in the first place and not having to get a stealer to do it at my expense either.I'm glad I wasn't a customer being charged by me to do the job due to the time it took me to figure out what went where and what was in the way but at least it is a learning curve and gives me satisfaction with knowing I can do it.That now means my next job is preparing for the MOT due this week  :'(.Will it pass? I hope so.Big thanks once again to Marks DTM Calib for a rapid and accurate response to my earlier questions.  :y