Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: shawman on 22 April 2010, 12:49:40

Title: removing facia to replace bulbs.
Post by: shawman on 22 April 2010, 12:49:40
can anyone help by telling me how to remove the facia to get to the l.e.d. bulds on the climate control to change them just been to my local vauxhall dealership i can buy the bulds for approx £1 each but they want to charge me £70-£100 for them to replace them, thanks in advance. John
Title: Re: removing facia to replace bulbs.
Post by: Welung666 on 22 April 2010, 13:06:14
Have a look in the maintenance section index for 'Changing the climate bulbs'.

Where are you John?
Title: Re: removing facia to replace bulbs.
Post by: Jimbob on 22 April 2010, 13:14:51
shortcut for you..
http://www.omegaowners.com/forum/YaBB.pl?num=1162120610

but as said, be aware of the maint guide index (see my sig) for details on how to tackle most jobs  :y

Title: Re: removing facia to replace bulbs.
Post by: shawman on 22 April 2010, 18:44:23
thank's for that lads, will give it a go when i have plenty of time to try it, looks tricky for me never realy done anything like that before. ps Blackburn mate.
Title: Re: removing facia to replace bulbs.
Post by: Welung666 on 22 April 2010, 20:08:50
Quote
thank's for that lads, will give it a go when i have plenty of time to try it, looks tricky for me never realy done anything like that before. ps Blackburn mate.

That's a bit far for me to pop over and help ;D ;D ;D

A little tip that's not on the link... Once you've got the trim off put a cable tie on each end of the pull down bar. Leave them full length and leave the long tails hanging downwards towards the stereo. Next time you have to take the trim off you've got 2 easy handles rather than trying to squeeze your fat little fingers in the single DIN hole ;) :y
Title: Re: removing facia to replace bulbs.
Post by: Andy B on 22 April 2010, 20:34:31
Quote
... your fat little fingers in  ...

Speak for yourself!  ;D   ;D
Title: Re: removing facia to replace bulbs.
Post by: mr ICE man on 26 April 2010, 20:32:19
To be honest it's easy!just few screws to remove.worst bit is reaching the little bar to pull it down!
Title: Re: removing facia to replace bulbs.
Post by: Welung666 on 27 April 2010, 00:09:51
Quote
To be honest it's easy!just few screws to remove.worst bit is reaching the little bar to pull it down!

Hence my cable tie tip ;) :y