Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: pedroMV6 on 25 April 2010, 17:57:56

Title: Estate Alarm
Post by: pedroMV6 on 25 April 2010, 17:57:56
If I just cut the wires to the rear side windows, will the alarm activate?
If it does,then what do I need to do?
Or, can I simply connect a wire to both (to keep the circuit) and then remove the pads from the windows?
Title: Re: Estate Alarm
Post by: TheBoy on 25 April 2010, 18:32:26
Stick a meter on them to see if they are n/o or n/c.  I suspect normally closed, as its a glass break sensor.
Title: Re: Estate Alarm
Post by: pedroMV6 on 25 April 2010, 19:23:47
Quote
Stick a meter on them to see if they are n/o or n/c.  I suspect normally closed, as its a glass break sensor.

That's why I thought that adding a wire in first, before disconnecting them from the glass.
Title: Re: Estate Alarm
Post by: pedroMV6 on 27 April 2010, 21:32:00
Just went for it - cut one pair off then discovered they simply pull off! ::)

Oh well, alarm didn't go off.