Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: I_want_an_Omega on 07 May 2010, 19:35:51

Title: Removing MAF connector ......
Post by: I_want_an_Omega on 07 May 2010, 19:35:51

I'm struggling to remove my MAF connector - it just wont budge.

Thing is I'm not sure whether I should be squeezing the tab down towards the back (i.e toward the wring loom), or toward the MAF itself.

I've tried both and rocking from side to side with no avail.

Any ideas?

Thanks

Title: Re: Removing MAF connector ......
Post by: Welung666 on 07 May 2010, 20:08:57

You're not having much luck with electrical connectors are you? ;D ;D

Squeeze the ribbed bit ;) They can be tight so I normally, while holding the ribbed part down, push the connector together and the other end will pop up then just pull ;)

Title: Re: Removing MAF connector ......
Post by: I_want_an_Omega on 07 May 2010, 21:28:17

ta