Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: mv6 omega on 11 May 2010, 17:19:58

Title: manual conversion wiring
Post by: mv6 omega on 11 May 2010, 17:19:58

hey there, new to the site. Ive just finished doing the manual conversion but now i get the automatic transmission error on mid. how do i get rid? ive read of earthing out a wire to change it to manual on mid but dont know what wires to do?

Car is currently sorned so cant get it to a tech2.

can anyone tell me what wires need sorting out plz?

great site btw

ed

Title: Re: manual conversion wiring
Post by: Welung666 on 11 May 2010, 18:37:43

Hi Ed, welcome aboard :y

Have a read of [size=16]THIS[/size] (http://www.omegaowners.com/forum/YaBB.pl?num=1218634381)[/b][/url] :y

Title: Re: manual conversion wiring
Post by: mv6 omega on 11 May 2010, 21:01:20

Thanks Welung666 ive already read the guide, i'm needing help on the automatic transmission error.

Ed

Title: Re: manual conversion wiring
Post by: Welung666 on 11 May 2010, 21:27:23

;D I misread your original post  :-[

Is your TID the grey connector?

Title: Re: manual conversion wiring
Post by: mv6 omega on 12 May 2010, 19:02:13

Yeah its the grey plug.

Title: Re: manual conversion wiring
Post by: Welung666 on 12 May 2010, 20:52:03

Pin 21, grey wire goes to the auto transmission :y

Title: Re: manual conversion wiring
Post by: mv6 omega on 12 May 2010, 21:28:57

Excellent, do i just chop the wire and then put the plug end of the wire to an earth point? taping up the other end frorm the loom.

Title: Re: manual conversion wiring
Post by: Welung666 on 12 May 2010, 21:53:14

IIRC yes but put a low blow fuse, such as a 3 amp, inline just in case. If it survives and clears the message then you should be OK without the fuse :y

Title: Re: manual conversion wiring
Post by: mv6 omega on 12 May 2010, 22:25:28

Thanks for the help. ill give it a go tomorow

Ed

Title: Re: manual conversion wiring
Post by: gsizoli on 16 May 2010, 14:16:37

I've also made the conversion on my 3litre, you have to go to TECH2 programming, to dissolve the automatic transmission message on your screen. In the ABS menu must set up that your car is manual, furthermore in the dispaly menu too (as i remember well).