Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: JohnM on 27 May 2010, 22:37:13

Title: X21 Connector
Post by: JohnM on 27 May 2010, 22:37:13

Is this its proper name?

And more to the point - can I buy the plug-in part itself (shown is the car loom fitted part).  (Without a new set of 12x sockets and cables).

(http://www.hiddengems.btinternet.co.uk/images/Omega-x25-1.JPG)
(http://www.hiddengems.btinternet.co.uk/images/Omega-x25-2.JPG)

Title: Re: X21 Connector
Post by: Kevin Wood on 28 May 2010, 10:37:04

I'm not sure. Worth asking a dealer, perhaps? Most people seen to attach to the wires with solder & heat shrink joints and ditch the connector.

Kevin

Title: Re: X21 Connector
Post by: Sixstring on 28 May 2010, 11:13:28

Gonna be doing this myself this weekend, will cut and heatshrink the connections when i have identified what they do, will post colours etc.

John... where do you live? if you are not confident, will dio it for you if you are not too far away......

Mike.

Title: Re: X21 Connector
Post by: Kevin Wood on 28 May 2010, 11:33:54

Quote

Gonna be doing this myself this weekend, will cut and heatshrink the connections when i have identified what they do, will post colours etc.

John... where do you live? if you are not confident, will dio it for you if you are not too far away......

Mike.

If you do a search you'll find the colours posted in this section somewhere. Might save you a job. :y

Kevin

Title: Re: X21 Connector
Post by: Kevin Wood on 28 May 2010, 11:36:15

Here, for starters:

http://www.omegaowners.com/forum/YaBB.pl?num=1242490914/0

kevin

Title: Re: X21 Connector
Post by: Sixstring on 28 May 2010, 11:50:40

Cheers, Kev.
appreciate it.

Mike.

Title: Re: X21 Connector
Post by: JohnM on 28 May 2010, 22:15:59

Quote

Gonna be doing this myself this weekend, will cut and heatshrink the connections when i have identified what they do, will post colours etc.

John... where do you live? if you are not confident, will dio it for you if you are not too far away......

Mike.

I'd take you up on that and even run up a BBQ and put some more beers in the fridge but not for a few wires.
Location as listed, Newark on Trent.

Really I just wanted to use the plug if I could get one on its own - is it a x21?

I'm getting there, but have been distracted today as I had to sort out the 'pain' (sp) of a bodge job where the cables had been routed into the boot.  And I still want to undo the N socket to refix but have a somewhat stuborn screw left that didn't shift today.  Did I mention I have a 'pain' of a car - and some unbodging still left to do.

Still, it'll be worth it - x21 plug or not it will be the best fitted yet.