Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: joff on 05 June 2010, 09:33:11
-
Have a small snag. TB did his magic with Tec2 and I have fitted new control arm and clutch switch this morning, but the cruise is not working. Does it need to go back on Tec2 or have I done something wrong. All connectors are home tight. :( :(
-
Was it the 4 wire stalk that got fitted?
-
check that the clutch switch is set correct,
drive down the road and pull clutch pedal towards you then see if cruise works.
-
It was the 4 wire stalk, and i have driven down the road and set to cruise in every gear but nothing happens.
-
just took the Mig down the road again and pulled the clutch back and got a very small click and now it is working. ;) thankyou all very much for your help again :y now its a rad flush and new front discs see you later. Thank you
-
Excellent :y