Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: mindaz on 13 July 2010, 06:46:55
-
hey pals, one day ago my info display became blury ,
Can it be fixed ::), or it is dead end for this display ?
How much it will cost £?
(http://img824.imageshack.us/img824/9012/cid001.th.jpg) (http://img824.imageshack.us/i/cid001.jpg/)
-
Not cheap to replace, theres some German ebay guys reckon they can fix them, also other issues about de pairing and pairing the HU and CID if you do get a replacement, but I'll let the experts on here explain that one.
Chris.
Edit, Just noticed you drive a 2.5DTi, so you must already be on the other side of the Channel. That should help.
:y
-
Looks like knackered LCD panel. From memory, its a Sharp LQ126AW panel (double check, sticker on back of LCD unit. Sadly, that panel is obsolete. LQ136 works in its place, but also difficult to source
-
LCD display works again,
thankz for advices :y
-
This is how mine started - it works then it doesn't - then you bang dashboard and it works - over time will just get worse. I bought replacement off German ebay which unfortunately had a fault which The Boy helped confirm and had to send back for supplier to fix - which they did. Has been fine for nearly 3 years now.
-
This is how mine started - it works then it doesn't - then you bang dashboard and it works - over time will just get worse. I bought replacement off German ebay which unfortunately had a fault which The Boy helped confirm and had to send back for supplier to fix - which they did. Has been fine for nearly 3 years now.
Rubber Mallet in boot then! :y