Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: MrTuco on 02 August 2010, 21:44:47

Title: Bluetooth
Post by: MrTuco on 02 August 2010, 21:44:47
Hi, I have an S reg 2.5 Elite with the CDR 500 radio, I am installing a Nokia CK-20W, what wire from the back of the stereo is the mute for when the phone rings please?
Title: Re: Bluetooth
Post by: CaptainZok on 02 August 2010, 22:19:04
Do you have the stubby aeriel on the rear of your car assuming it's a saloon?
If so remove the glove box and there should be a plug with all the phone connections stuck up which you can get an adapter to plug straight into the bluetooth kit.
Title: Re: Bluetooth
Post by: Dave DND on 02 August 2010, 23:09:49
CDR500 should have a label on the top showing the pin locations - its on the lower power block above the ignition live feed.

There was a good link somewhere to the ISO pinouts, can anyone remember where it is?

Title: Re: Bluetooth
Post by: MrTuco on 02 August 2010, 23:13:15
Quote
Do you have the stubby aeriel on the rear of your car assuming it's a saloon?
If so remove the glove box and there should be a plug with all the phone connections stuck up which you can get an adapter to plug straight into the bluetooth kit.
Where do I get this adapter from & what is it called please?