Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: joshwyatt on 05 August 2010, 16:16:58

Title: Depairing CID
Post by: joshwyatt on 05 August 2010, 16:16:58

To remove a CID from an Omega, do you need the car pass? I know it's a tech2 job as it's coded to the HU and the car, but if a tech2 is plugged in, can you simply put it in delivery mode and then remove it from the original vehicle ready to be fitted to another Omega?

Title: Re: Depairing CID
Post by: tunnie on 05 August 2010, 16:28:42

its not a simple tech2 to de-pair it, it has to be (as you say) be put into 'Delivery Mode' TB has a way of doing it but its not guaranteed to work, it could make the CID toast...

Title: Re: Depairing CID
Post by: zirk on 05 August 2010, 16:32:01

Fairly certain you need the car pass, unless your moving both the CID and HU together, probably wrong, no doubt will find out.
 :)

Title: Re: Depairing CID
Post by: TheBoy on 05 August 2010, 19:28:40

Joshwyatt, in your case, carpass not needed, but it is a PITA.

Is the CID paird to NCDC2013 or 2015?