Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: shane1000 on 19 August 2010, 19:39:14
-
i've changed all the clock bulbs and still cant see how fast i'm going at night. there is'nt any blown fuses and i cant see any lose wires... any one have a clue?
-
May seem a very simple thing to suggest, but have you checked that the dimmer wheel is not turned right down? ;) ;)
-
May seem a very simple thing to suggest, but have you checked that the dimmer wheel is not turned right down? ;) ;)
Very tactfully put, Lizzie ;) ;D :y
-
May seem a very simple thing to suggest, but have you checked that the dimmer wheel is not turned right down? ;) ;)
Very tactfully put, Lizzie ;) ;D :y
;D ;D :y I do try Phil! :D :D ;)
-
erm... yes its turned full on, first thing i tried. i'm stumped on this one. i've had the dash out when i put the bulbs in and could'nt see a thing wrong.. might change the screwdriver for a hammer and see if that works
-
i've changed all the clock bulbs and still cant see how fast i'm going at night. there is'nt any blown fuses and i cant see any lose wires... any one have a clue?
::) ::)
(http://ecx.images-amazon.com/images/I/51n9IKEvISL._SS500_.jpg)
-
that looks a bit fancy for me so i'm sticking to two torches with celotape wrapped around .. ha ! ha !
-
erm... yes its turned full on, first thing i tried. i'm stumped on this one. i've had the dash out when i put the bulbs in and could'nt see a thing wrong.. might change the screwdriver for a hammer and see if that works
Right, the next step is to check that the dash is seated correctly; give it a good push to the left of its centre ;) ;)
-
.................and once you have tried that Shane, check fuse 15.
You may well have blown it ;) ;)
-
its raining now so tommorrows job. will let you kow thanks