Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: dragonlord on 12 September 2010, 04:55:20

Title: power sounder wireing
Post by: dragonlord on 12 September 2010, 04:55:20
right IM a bit confused from reading about

ie some post iv read seem to sergest the power sounding siron only gos off as a back up when batter is disconected and when alam gos off the horn sounds

well iv got a miniface lift and when ever the alarm was trigered It was alwaly a siren sound not horn


its gave up the gost now set alam off and no sound only flashing indicators

doce any one know what the wireing is to power sounder ie pin outs are

as i was think there so much a pain why can we just wire another siren to alam without the nicads in just a normal siren
Title: Re: power sounder wireing
Post by: Brikhead on 12 September 2010, 10:32:07
The power sounder and regular 'horn' are mounted on the same bracket under the scuttle trim panel, they are susceptible to water damage due to their location, either your 'horn' has been disconnected, or it has been damaged by water...

Both power sounder and regular 'horn' should sound when the alarm is triggered.
Title: Re: power sounder wireing
Post by: dragonlord on 12 September 2010, 15:48:23
right that a lot more clear to me i get it know

no horns ok still sounds when i lean on steering wheel

just never sounded with alarm

but still any one know what the wireing/pin outs are on the powre sounder siren

as if i can find out I wire another diffrent siren to it with the blood dreeded nicad battteryed ones