Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: marcbucks on 04 October 2010, 15:56:09
-
Hello,
Just a quick question.
I have searched on the site for dealing with a "NO DISC" error and cannot find any info.
I am certain there is some somewhere as this site has never let me down even with the complicated stuff. Is there anyone that can stick a link for me to the correct advice.
Rather than waisting your time answering a question thats been asked a thousand time
TY
Marc
-
CCR600/800 or CCRT700?
-
NO DISC error on a CDC2 changer usually means a sensor or laser failure - if it has been stood a while, or cartridge been in there a long time without inserting/ejecting, then probably a sensor, if you have used CDR`s in there, then probably the laser.
Both quite an expensive fix on that model