Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Dracoro on 19 October 2010, 13:28:19

Title: Remote battery + removal
Post by: Dracoro on 19 October 2010, 13:28:19
Don't have manual and need new remote battery from in town today.

Anyone know
a) what battery is needed
and, more importantly
b) how do I open the keyfob to get to the battery (which will answer a) I suppose! :D

By opening/replacing, will the key still work? or do I need to resync?

Car is facelift 2.5 Elite with 3 button fob.

Ta.
Title: Re: Remote battery + removal
Post by: mathewst on 19 October 2010, 13:32:12
You have a small hole on one side of plastic case close to metal part. Use a small screwdrivedr and simply pry it apart.
Baterry is cr 2032 as I recall
Title: Re: Remote battery + removal
Post by: mathewst on 19 October 2010, 13:33:05
Forgot to say, hole is on the oposite side of the buttons
Title: Re: Remote battery + removal
Post by: Welung666 on 19 October 2010, 13:41:12
To claify what M has already said. Take the remote part off the key part (small tab on the rear) but DON'T lose the little chip in the horseshoe! The remote part will prise apart (be gentle) and reveal the battery. And yes a CR2032.

It shouldn't need a resync, if it does it's a simple as switching the ignition to number 2 (red lights) and pressing the lock button, it should lock and unlock about a second apart and job done! :y
Title: Re: Remote battery + removal
Post by: dbug on 21 October 2010, 17:20:33
Seem to remember that if you can swap battery within 30 seconds won't need a resync ;) ;)