Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Danny on 16 December 2010, 20:35:53

Title: headunit question
Post by: Danny on 16 December 2010, 20:35:53

looking at an omega that i believe has had satnav but the stereo has been removed and replaced with a single din fascia and blanking plate

can i assume that sticking a ccr2006 in place will make no difference unless the ncdc was un-paired properly??

also, is a non-working boot-release gonna be possibly down to a fuse?

thanks

Title: Re: headunit question
Post by: VXL V6 on 16 December 2010, 20:40:12

What display screen has the vehicle got fitted?

Title: Re: headunit question
Post by: joshwyatt on 16 December 2010, 20:50:52

VA03 OOG per chance?

Title: Re: headunit question
Post by: Danny on 16 December 2010, 21:11:05

i dont know what screen (i.e tid, mid, gid, i just know its not the colour one) but yes Josh its OOG (its 5 minutes away from me)

Title: Re: headunit question
Post by: fiend61 on 16 December 2010, 22:55:57

hasn't that car been on here before?  ;)

Title: Re: headunit question
Post by: Danny on 17 December 2010, 15:44:37

i believe so, but i wasnt looking for one back then :y

Title: Re: headunit question
Post by: Andy H on 18 December 2010, 10:48:52

A graphics display (CID or GID) for any NCDC unit won't work with the CCR2006. Were you able to change what was shown on the display? The graphics displays are controlled through the NCDC HU by pressing steering wheel controls. 'Normal' displays are controlled by buttons on the wiper stalk and don't rely on the HU.

The boot release button my 03 facelift has to be held in for 3 or 4 seconds before the boot opens. I thought it was broken until someone pointed out that there was a built in delay.