Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: dervdoc on 07 December 2010, 16:47:09
-
iv a 95 prefacelift omega GLS, iv bought an interior out of a prefacelift elite , usual heated seats with the memory fuction, i was origionally told the wiring would be there but afer scanning the forum and reading posts im not so sure! can anyone shine a bit of light on this???
also will the loom for the switches for the dash be hid behind it?
many thanks
-
I`d be very surprised if you had any of the loom/s being a GLS spec
-
only some gls spec cars (with winter pack) have the heated seat wiring, none of them have the wiring to run memory seats, you would need to modify the electric seat (up and down) feed for the cd spec seats, to allow you to use memory functions.
also did you get the seat bolts with the elite seats? as they are longer than the standard ones.
got your work cut out im afraid :-/
-
i will be getting the bolts with them, it can be done tho?
-
before you commit to buying the leather, look at the switch loaction for the heated seats (center console) and see if there are female pins visible? if the holes are just empty, then there is no heated seat wiring, and wont be any leccy seat feed usable to make the adaptor for memory seats.
-
right i dont have these pins is the any handy way of me making up my own loom to rig them up
-
right i dont have these pins is the any handy way of me making up my own loom to rig them up
when i did mine i got one of the breakers on here to remove the plugs with about 8 inches of loom from the back of the switchs you need the two end ones (obviously) depending on what other switches you have will depend on the amount of rewiring you need to do
you can join into the loom that is there for the switch 0v, illumination and the ign 12v from cig lighter (if you look at fuse listings no 14) this is for heated seats too
you then need to run One wire from the switch to the seat to the heat pad (i put an inline fuse in the wire to be sure) the 0v is already there from the electric seat adjust
the seats in my 1995 gls
http://www.omegaowners.com/forum/YaBB.pl?num=1288461717
you can have the memory funtion of the seats only (not mirrors) by connecting to the seat connector you need the plug with the drivers seat
see
http://images.omegaowners.com/images/faq/eliteseats/elite_seat.pdf
just use the wires that are already there just splice in the extra wires
hth
-
help was very much appreciated, fitted the seats today, memory function working perfect, next chalange is making up my loom for the heated function
-
help was very much appreciated, fitted the seats today, memory function working perfect, next chalange is making up my loom for the heated function
I've got an old centre console with those cables in place and will happily send them to you if you PM me your address. :y
-
thanks m8 but the fella i got all off gave me switches and part of the loom,