Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: omegabsw on 09 February 2011, 12:16:48
-
OK I have a facelift CDX that im breaking with Xenons and I was wondering how hard they would be to transplant to my facelift CD.
I take it there is some ballast and wireing that I need to transplant with them?
-
Opening up a can of worms here mate ;D
Basically to retrofit without self-levelling you will need the plug from the HID bulb with a short piece of loom + the headlamp washers & washer bottle & piping from the CDX. Swap the level motors from the CD lamps then splice into the existing loom on the CD`s dipped beam connector colour matching colour. Front of triangular relay box near battery add a 30A fuse to the washer relay for the headlamp washers
-
Ok that dont sound too bad, how comes I need the headlight washers as well?
It aint a problem, as the bumper on my CDX is in a lot better condition as my 2.2 CD has had a little front end shunt so it was gonna be changed over anyway
-
http://www.omegaowners.com/forum/YaBB.pl?num=1199707221
-
http://www.omegaowners.com/forum/YaBB.pl?num=1199707221
Top man, thanks for that! :y