Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: miggy on 07 March 2011, 12:17:08

Title: memory seats
Post by: miggy on 07 March 2011, 12:17:08

Is the Omega CDX pre wired to fit memory seats from an Elite, if so where is the pre wired plug, most things are pre wired but cannot find the plug for the memory seats, it should be a 20 pin male??
Any of you guys know or done this seat swap before.

Title: Re: memory seats
Post by: RobG on 07 March 2011, 12:29:09

Nope.....this might help
http://www.omegaowners.com/forum/YaBB.pl?num=1234703022

Title: Re: memory seats
Post by: TheBoy on 07 March 2011, 13:30:49

If the memory seats were not factory fitted, the loom will be missing. Not easy to retrofit for the full memory function.

The above comment includes Elites that were factory fitted with the Sports Pack.

Title: Re: memory seats
Post by: miggy on 07 March 2011, 13:44:32

Quote

If the memory seats were not factory fitted, the loom will be missing. Not easy to retrofit for the full memory function.

The above comment includes Elites that were factory fitted with the Sports Pack.

Cheers TB, is there a way i can at least get forward, back and height motion, i dont really need the memory

Title: Re: memory seats
Post by: miggy on 07 March 2011, 16:52:07

All done now, took me most of the day but memory now also working but altering the wiring layout. :y :y

Title: Re: memory seats
Post by: TheBoy on 07 March 2011, 17:51:49

To answer your previous Q, as you have found, you just need to provide 12v and 0v to the right wires.