Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: wesagog on 16 May 2011, 14:35:29

Title: VIN Input in TIS 2000
Post by: wesagog on 16 May 2011, 14:35:29

Dears,

My VIN is: W0L000025T1004507 (Omega B)
When I input this vin in TIS2000 I get eror (E714)...
Any help please?

Title: Re: VIN Input in TIS 2000
Post by: TheBoy on 16 May 2011, 19:44:31

Why are you trying to enter vin into tis  :-/

Title: Re: VIN Input in TIS 2000
Post by: wesagog on 16 May 2011, 23:10:35

I want to get the wiring harness in order to find the connectors (male-female) between the outside harness and the inside...
I think I have a problem (bad connection or loose) so I want to check and clean all the connectors. I found one of them which located under the rear set very rusty and lose.
If you can help me please.

Title: Re: VIN Input in TIS 2000
Post by: Jimbob on 17 May 2011, 06:18:54

Just give it rough details, it doesnt need your VIN  :y

ive never entered one and access all I need :y

Title: Re: VIN Input in TIS 2000
Post by: TheBoy on 17 May 2011, 20:59:47

Quote

I want to get the wiring harness in order to find the connectors (male-female) between the outside harness and the inside...
I think I have a problem (bad connection or loose) so I want to check and clean all the connectors. I found one of them which located under the rear set very rusty and lose.
If you can help me please.

Don't bother with VIN, just enter Model (Omega) and Year (2002 or 2003 - even if yours is earlier, as those are the only 2 years with electronics wiring diagrams)

Title: Re: VIN Input in TIS 2000
Post by: hazpaker on 21 May 2011, 07:08:38

just imput this vin into tis 2000 and got omega B 1996 :), double check you are keying it in correctly :y