Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: russ0205 on 02 July 2011, 21:17:16
-
Has anyone got any ideas my 02 2.6cdx has started to blow fuse 15 (30A) its done it twice now and it cuts the car out completly, I have looked at the usual chafed wires etc but no joy, ok its taken two months between but if i had any hair i would have torn it out by now. It hasn't stored any codes either, Any ideas ???
:-[ :-[
-
Check all heatpad wiring under driver`s seat
-
Yup, I had this. It was driving me bonkers for whole day!
RobG was the man, he pointed me to heated seat wiring.
What was odd was I found when i was sat on the edge of the drivers seat it would cut out, usually when I went to close the door. For a while I thought it was related to the door!
My little test, engine running, door open, stand on the outer edge of the seat and walk along it, it would cut out when stood in the middle!
Could never trace the exposed wire which was causing it, so just cut the feed wire & sealed. Solved the problem.
Don't need heated seats with cloth anyway!
-
Mine was the heated seat wiring as it goes above one of the seat motors, not very easy to see (seat has to come out) it was chafed by the seat frame, there was a plastic rubbing strip stuck on the seat frame but it was stuck on the wrong side..
You can disconnect the seat heating from the loom down by the seat adjustment switches as a temporary measure.. As part of the fault finding I installed separate fuses in that area for the seat heating feed..
-
Thanks guys will give it a try tomoro after last night bbq don't think my head will bend down that far,
:( :(