Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Vamps on 03 July 2011, 21:42:03
-
Does this have a circuit board in it? (on the washer bottle) if so mine is broken, very broken..... ::) ::)
Now I know it has not been working since the snow, not a problem, just that I have to tap the end of the stalk to get rid, hardly a problem....
My question is, can I just join the two wires together and bypass the whole thing?
-
Got one here £4 posted :)
-
Have you tried physically pushing the float switch down inside the expansion tank a few times with your finger Mike? Also take off the metal wing clip holding the tank & slide the tank inwards an inch or so until it comes free of its track & check that the multiplug is still firmly attached! If after all this you still have the 'check' warning, the float switch is goosed & a new tank is in order ::) The plug can be short circuited using a paperclip :y
-
Have you tried physically pushing the float switch down inside the expansion tank a few times with your finger Mike? Also take off the metal wing clip holding the tank & slide the tank inwards an inch or so until it comes free of its track & check that the multiplug is still firmly attached! If after all this you still have the 'check' warning, the float switch is goosed & a new tank is in order ::) The plug can be short circuited using a paperclip :y
Mike is on about the washer bottle Phil :D
-
Have you tried physically pushing the float switch down inside the expansion tank a few times with your finger Mike? Also take off the metal wing clip holding the tank & slide the tank inwards an inch or so until it comes free of its track & check that the multiplug is still firmly attached! If after all this you still have the 'check' warning, the float switch is goosed & a new tank is in order ::) The plug can be short circuited using a paperclip :y
Mike is on about the washer bottle Phil :D
:-[ Doh!!!! :-[
Too much Gin & it, & a lung infection make Jack a (very) Dull Boy!! ;D ;D ;D ;D ;D ;)
-
Pop out the sensor, and clean it up (sometimes get gunked up with that white stuff). Though if it was ice, its probably fubar, but easy enough to visually check.
-
Pop out the sensor, and clean it up (sometimes get gunked up with that white stuff). Though if it was ice, its probably fubar, but easy enough to visually check.
The green circuit board is broken.....
:(
-
Got one here £4 posted :)
PM Sent..... :y
-
Pop out the sensor, and clean it up (sometimes get gunked up with that white stuff). Though if it was ice, its probably fubar, but easy enough to visually check.
The green circuit board is broken.....
:(
Ah, replace then ;D
-
Rob, you have funds...... :y :y
-
Rob, you have funds...... :y :y
Just to confirm Mike. This what you`re needing
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
-
Rob, you have funds...... :y :y
Just to confirm Mike. This what you`re needing
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
I do not know what is behind as all I got was a broken circuit board, the whole thing did not come out ::) ::) But it looks like what I want, and TB confirmed...... :y
-
Rob, you have funds...... :y :y
Just to confirm Mike. This what you`re needing
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
I do not know what is behind as all I got was a broken circuit board, the whole thing did not come out ::) ::) But it looks like what I want, and TB confirmed...... :y
Monies received, will be in the post tomorrow Mike :y
Don`t bust it putting it in :D
-
Rob, you have funds...... :y :y
Just to confirm Mike. This what you`re needing
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
I do not know what is behind as all I got was a broken circuit board, the whole thing did not come out ::) ::) But it looks like what I want, and TB confirmed...... :y
Monies received, will be in the post tomorrow Mike :y
Don`t bust it putting it in :D
Thanks Rob, if it comes before the lakes I will seek professional help..... :y
-
Rob, you have funds...... :y :y
Just to confirm Mike. This what you`re needing
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
I do not know what is behind as all I got was a broken circuit board, the whole thing did not come out ::) ::) But it looks like what I want, and TB confirmed...... :y
Monies received, will be in the post tomorrow Mike :y
Don`t bust it putting it in :D
Thanks Rob, if it comes before the lakes I will seek professional help..... :y
It`s going 1st class, so wrap it in cotton wool and get it fitted at the meet ;D
-
Rob, you have funds...... :y :y
Just to confirm Mike. This what you`re needing
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
I do not know what is behind as all I got was a broken circuit board, the whole thing did not come out ::) ::) But it looks like what I want, and TB confirmed...... :y
Monies received, will be in the post tomorrow Mike :y
Don`t bust it putting it in :D
Thanks Rob, if it comes before the lakes I will seek professional help..... :y
It`s going 1st class, so wrap it in cotton wool and get it fitted at the meet ;D
Thanks Rob...... :y
-
Rob, you have funds...... :y :y
Just to confirm Mike. This what you`re needing
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
I do not know what is behind as all I got was a broken circuit board, the whole thing did not come out ::) ::) But it looks like what I want, and TB confirmed...... :y
Monies received, will be in the post tomorrow Mike :y
Don`t bust it putting it in :D
Thanks Rob, if it comes before the lakes I will seek professional help..... :y
It`s going 1st class, so wrap it in cotton wool and get it fitted at the meet ;D
Thanks Rob...... :y
I thought they were just a simple open/closed (on/off) switch and the electrickery for the light was else where. :-/ :-/
-
Rob, you have funds...... :y :y
Just to confirm Mike. This what you`re needing
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
I do not know what is behind as all I got was a broken circuit board, the whole thing did not come out ::) ::) But it looks like what I want, and TB confirmed...... :y
Monies received, will be in the post tomorrow Mike :y
Don`t bust it putting it in :D
Thanks Rob, if it comes before the lakes I will seek professional help..... :y
It`s going 1st class, so wrap it in cotton wool and get it fitted at the meet ;D
Thanks Rob...... :y
I thought they were just a simple open/closed (on/off) switch and the electrickery for the light was else where. :-/ :-/
That is what I was expecting, obviously I did not get the whole thing out, just found electrickery that was obviously broken....hey ho, it's a Mig..... :D :D :D
-
Vamps, is yours a f/l (:)) or prefacelift (:() - iirc, they are in different places between the models...
-
One of each iirc. He doesnt appear to have mentioned which one has the problem. :-/
-
OOP's, never thought of that, well, never mind, ordered now..... :-[ :-[
It's for the facelift......
-
OOP's, never thought of that, well, never mind, ordered now..... :-[ :-[
It's for the facelift......
.............and it`s a F/L one that was sent 1st class this morning :y 8-)
-
OOP's, never thought of that, well, never mind, ordered now..... :-[ :-[
It's for the facelift......
.............and it`s a F/L one that was sent 1st class this morning :y 8-)
Phew............Thanks Rob.... :y
-
Don`t bust it putting it in
;D
also vamps make sure you put it the right way up ::)
-
Don`t bust it putting it in
;D
also vamps make sure you put it the right way up ::)
:D :D :D
-
Thanks Rob, it arrived this morning.... :y :y :y
-
Thanks Rob, it arrived this morning.... :y :y :y
So have you fitted it yet! ::) ::) ::)
-
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
what he said :)
I doubt it :-X ;D
-
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
what he said :)
I doubt it :-X ;D
Been very busy at work and by the time I get home I can not be bothered, so no.......I will take it to the lakes and fit it there..... :D :D :D
-
....
I will take it to the lakes and fit it there..... :D :D :D
Or get someone else to fit it for you ::) ::) ::) ::)
-
....
I will take it to the lakes and fit it there..... :D :D :D
Or get someone else to fit it for you ::) ::) ::) ::)
Perhaps....... :D :D :D