Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Roger Booton on 07 July 2011, 19:49:30

Title: computer display
Post by: Roger Booton on 07 July 2011, 19:49:30

[size=18]Hi can someone please tell me what kind of computer display is in my 1996 omega elite and can i just change it If so has anybody got one please[/size]  :o[/b]

Title: Re: computer display
Post by: Brikhead on 07 July 2011, 20:53:20

Speak up Mate, we old un's can't hear so well.

Title: Re: computer display
Post by: dbug on 07 July 2011, 21:12:32

FFs - highlighted and hugh font size  ;D ;D ;D

Title: Re: computer display
Post by: Roger Booton on 09 July 2011, 21:05:57

Sorry just experimenting still need the computer though :y

Title: Re: computer display
Post by: RobG on 09 July 2011, 21:12:08

Early MID`s are prone to pixel failure, hard to source another in good nick. You need one from same model & spec and obviously with the same connector at the rear

Title: Re: computer display
Post by: TheBoy on 11 July 2011, 10:08:05

The pre 1998 ones are unreliable.

The later, reliable ones have a different plug on the back, so would need a bit of rewiring...

Title: Re: computer display
Post by: Roger Booton on 21 July 2011, 07:28:36

Thanks for your help would have replied sooner but been very busy I found another but unfortunatley it doesn't light up @ all.
Back to the drawing board.

Title: Re: computer display
Post by: Jimbob on 21 July 2011, 08:02:05

Quote

Thanks for your help would have replied sooner but been very busy I found another but unfortunatley it doesn't light up @ all.
Back to the drawing board.

are you sure its not just the 4 lamps in the back have blown?
most people dont notice 1, 2, or 3 have gone, until the last one goes too.

Title: Re: computer display
Post by: cem_devecioglu on 21 July 2011, 21:48:30

Quote

The pre 1998 ones are unreliable.

The later, reliable ones have a different plug on the back, so would need a bit of rewiring...

definitely.. I'm on the second one and the second also start dead pixels , either go for the new one (and do some rewiring -I hope someone can help-) or ignore..