Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: fakeq on 01 August 2011, 16:22:10

Title: electrical window swaping
Post by: fakeq on 01 August 2011, 16:22:10

Hi
Im changing the wireing from front left door atm. and cant find a safe way to get the plastic circle thingy off the the door. wery hard to see how this is secured. nothing in haynes describeing it eather.

Title: Re: electrical window swaping
Post by: RobG on 01 August 2011, 16:27:25

Pair of grips and twist

Title: Re: electrical window swaping
Post by: fakeq on 01 August 2011, 16:31:01

ah I see, on both sides or only from inside and then pull out from the outside?

Title: Re: electrical window swaping
Post by: RobG on 01 August 2011, 16:33:29

Open door and grip the circular plug on the outside (above check strap) then twist downwards

Title: Re: electrical window swaping
Post by: fakeq on 01 August 2011, 16:46:35

ok, so I need to put the quick connector back so I get bether grip? so hard to get good grip eather way, wery thight space inside to work on.

Title: Re: electrical window swaping
Post by: RobG on 01 August 2011, 16:51:09

Have you managed to separate the circular connector, if so, just a case of removing old door loom, route new loom and push the circular connector from inside the door towards the outside and re-connect

Title: Re: electrical window swaping
Post by: fakeq on 01 August 2011, 17:16:14

Thanks alott!
Was a fiddle but alitlebit force and it camed out :)

Title: Re: electrical window swaping
Post by: RobG on 01 August 2011, 17:23:24

Quote

Thanks alott!
Was a fiddle but alitlebit force and it camed out :)

Persistence pays off. Well done :y