Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Shimmy on 02 September 2011, 18:32:34

Title: Bose specifications
Post by: Shimmy on 02 September 2011, 18:32:34

Nothing urgent here, just curious to know the full specifications of the Bose setup in a 3.2 Elite.

I found this picture:
(http://images.omegaowners.com/documents/audio/BoseOmegaSaloon1.jpg)

Does anyone else have any more detailed information on the speakers/tweeters and amplifier?

Thanks.

Title: Re: Bose specifications
Post by: VXL V6 on 03 September 2011, 10:00:08

Just remember it's all based around non-standard 2 Ohm speakers and the head units have to be put into Bose mode (lowered output to drive Bose Amp correctly) and your about covered!

If you  want to improve the system in any way you will have to loose the whole setup: Speakers, Amp, Headunit, Bose Loom. You will also need to loop the speaker connections back at the kick panel connector (assuming you already have Bose equipment).