Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: griff2494 on 17 October 2011, 21:59:20

Title: dashboard
Post by: griff2494 on 17 October 2011, 21:59:20

hi all

prob been asked many times but cant find the answer

i have a 2002 2.2 auto sport omega, at least 1 buld has gone on the dash / speedo (its the main beam symbol)

thing is how to i get to the back of the clocks to change it ????????

please help

griff

Title: Re: dashboard
Post by: TheBoy on 17 October 2011, 22:00:11

There is a guide, with videos, in Maintenence Guides section :y

Title: Re: dashboard
Post by: aaronjb on 17 October 2011, 22:01:44

http://www.omegaowners.com/forum/index.php?topic=90618.0

That one, in fact.

Title: Re: dashboard
Post by: Webby the Bear on 17 October 2011, 22:08:51

nice guide and vid.  as always  :y :y:y

Title: Re: dashboard
Post by: bored bigyin54 on 17 October 2011, 22:17:13

robg done mine made it look so easy

Title: Re: dashboard
Post by: Webby the Bear on 17 October 2011, 22:22:24

just out of interest..........

once the heater vents are out and the screw above the steering column is out what happens next?

Title: Re: dashboard
Post by: TheBoy on 17 October 2011, 22:26:26

Quote from: Webby the Bear on 17 October 2011, 22:22:24

just out of interest..........

once the heater vents are out and the screw above the steering column is out what happens next?

Pull the left side out, unplug display, then withdraw unit

Title: Re: dashboard
Post by: Webby the Bear on 17 October 2011, 22:27:44

Quote from: TheBoy on 17 October 2011, 22:26:26

Quote from: Webby the Bear on 17 October 2011, 22:22:24

just out of interest..........

once the heater vents are out and the screw above the steering column is out what happens next?

Pull the left side out, unplug display, then withdraw unit

simples!  :y

Title: Re: dashboard
Post by: Field Marshal Dr. Opti on 18 October 2011, 21:22:51

Might be worth giving the top of the dash (above the instruments) a good hard pisser or two. Might save you a lot of time. Worked for me.... :y   

Title: Re: dashboard
Post by: Webby the Bear on 18 October 2011, 21:23:34

Quote from: Opti on 18 October 2011, 21:22:51

Might be worth giving the top of the dash (above the instruments) a good hard pisser or two. Might save you a lot of time. Worked for me.... :y

 ???

lol

Title: Re: dashboard
Post by: Field Marshal Dr. Opti on 18 October 2011, 21:27:24

Quote from: Webby the Bear on 18 October 2011, 21:23:34

Quote from: Opti on 18 October 2011, 21:22:51

Might be worth giving the top of the dash (above the instruments) a good hard pisser or two. Might save you a lot of time. Worked for me.... :y

 ???

lol

Pulled the instrument panel apart to replace two blown bulbs only to find their filaments intact. A good old-fashioned pisser or two restored full illumination...... :y :y ;D ;D ;D