Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: GaryBC on 18 October 2011, 15:13:59

Title: Washer fluid warning
Post by: GaryBC on 18 October 2011, 15:13:59

I've stopped getting a low fluid warning.

I'm not going to lose any sleep over this one but, if it's a quick and simple fix, I'll fix it.

Where's the sensor and how does it come out?

Cheers,
Gaz

Title: Re: Washer fluid warning
Post by: RobG on 18 October 2011, 15:56:36

Left of centre in washer tank
(http://i190.photobucket.com/albums/z257/belisensis/WASHMOTORS.jpg)
and it looks like this when you pull it out
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)

Title: Re: Washer fluid warning
Post by: amba on 18 October 2011, 16:00:22

Replaced mine a few weeks ago as had similar warnings appearing. :-[

I found the easiest way to get to it was remove the n/side front fog light trim grille.You will then be able to see the sensor if you look through the space to the washer bottle and it just pulls out as held in on a rubber "O" seal.Pull off the wire plug and replace with new one.

Got mine from Autovaux ..about £7=50 including delivery so simple job. :y :y :y

Best of luck.

Title: Re: Washer fluid warning
Post by: TheBoy on 18 October 2011, 18:59:42

Facelift as per RobG's pic above, prefacelift is in the passenger side of the bottle - I tend to pop the bumper off...