Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: danzigfan on 21 October 2011, 06:50:28

Title: 0335 ?
Post by: danzigfan on 21 October 2011, 06:50:28

If my memory serves me ok, than 0335 code means my crankshaft sensor is going, right?

Title: Re: 0335 ?
Post by: Jimbob on 21 October 2011, 07:47:52

It is indeed.

http://www.omegaowners.com/forum/index.php?topic=90583.0

Title: Re: 0335 ?
Post by: danzigfan on 21 October 2011, 07:52:47

Thanks, I've ordered stealer's part for 70 euros, original couse I have fake one in, lasted for only six months. Thanks again for fast response  :y

Title: Re: 0335 ?
Post by: feeutfo on 21 October 2011, 10:56:57

Yep, can go right, or left, but usually tits up! ;D

Sorry, it's a laugh or cry day here... ;)

Title: Re: 0335 ?
Post by: danzigfan on 21 October 2011, 11:40:12

Quote from: chrisgixer on 21 October 2011, 10:56:57

Yep, can go right, or left, but usually tits up! ;D

Sorry, it's a laugh or cry day here... ;)

  ;D As the day should be, every day (though I'm cursing all day due to sensor failure)  >:( :y

Title: Re: 0335 ?
Post by: danzigfan on 27 October 2011, 07:58:36

Sorry to bug again, fitted new original GM crank sensor yesterday.....this morning started poor miggy - eml came on showing two codes : 0335 crank sensor and 0340 cam sensor. Could it be cam sensor all the time? I'm a bit confused..... :'(

Title: Re: 0335 ?
Post by: Jimbob on 27 October 2011, 08:06:57

Cam sensors do cause other faults to be logged incorrectly, so quite possible.

Title: Re: 0335 ?
Post by: danzigfan on 27 October 2011, 08:12:16

So....it means I have a spare working crank sensor in the trunk I guess..... ???

Title: Re: 0335 ?
Post by: danzigfan on 27 October 2011, 08:15:54

I'm going to work now and hope it will handle 100 miles more. Is there maybe "how to" change cam sensor on 2.0 here? I hope it's easier than crank sensor

Title: Re: 0335 ?
Post by: danzigfan on 27 October 2011, 09:29:48

Car has died, codes are 0335 , 0340 , 0352. Anyone have an idea?

Title: Re: 0335 ?
Post by: RobG on 27 October 2011, 09:56:00

Quote from: danzigfan on 27 October 2011, 08:15:54

I'm going to work now and hope it will handle 100 miles more. Is there maybe "how to" change cam sensor on 2.0 here? I hope it's easier than crank sensor

This is for the 2.2 but basically the same with the exception of the coilpack
http://www.omegaowners.com/forum/index.php?topic=90628.0

Title: Re: 0335 ?
Post by: danzigfan on 27 October 2011, 12:31:13

Thanks RobG, it seems quite nice job. Will pick up sensor tomorrow morning and try to replace it. I hope it will cure poor old lady. Thanks again

Title: Re: 0335 ?
Post by: danzigfan on 28 October 2011, 12:16:03

Cam sensor replaced today, went to work doing 110 mph constantly.....old lady alive again!!!!!! Thank you Jimbob, thank you Chris and thank you RobG for the link!!!!  ;D :y :y :y The best forum you have here! :y :-*

Title: Re: 0335 ?
Post by: birdman on 28 October 2011, 22:52:37

110!!!!! plod would have you here! :D

Title: Re: 0335 ?
Post by: PhilRich on 28 October 2011, 22:56:51

P0335   Crankshaft Sensor Open Circuit   :'(

Title: Re: 0335 ?
Post by: PhilRich on 28 October 2011, 22:59:10

Doh! I really MUST read to the bottom of the piggin' page before sticking my nose in! ;D

Title: Re: 0335 ?
Post by: danzigfan on 29 October 2011, 08:37:52

Sorted!!!!! :y ;D