Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Michael2.6 on 22 October 2011, 17:49:02

Title: Car pulling to the left
Post by: Michael2.6 on 22 October 2011, 17:49:02

The trackrod ends has been renewed, wishbone rubbers has also been renewed and 4 wheel alignment has been done, why is it still pulling to the left?

Title: Re: Car pulling to the left
Post by: Jimbob on 22 October 2011, 18:30:48

question is who did the alignement and what are the figures.
most places just set 'in the green' which, to be honest, is a waste of money as the figures are too wide.

Title: Re: Car pulling to the left
Post by: markspark on 22 October 2011, 21:16:52

tyres ????

Title: Re: Car pulling to the left
Post by: ndmv6 on 22 October 2011, 22:25:42

worn centre drag bar?,seized front n/s caliper?  had new tyres on mine,both front wishbones,track rods inner and outer,had car set up on a hunter engineering 4 wheel alignment machine,had tracking and camber done,still pulls to the left,but its not scrubbing the tyres..
watching thread with interest  :)

Title: Re: Car pulling to the left
Post by: Stallion on 22 October 2011, 23:10:49

hows the suspension/shocks condition? And i thought seized calipers affect only when braking? ;y

Title: Re: Car pulling to the left
Post by: feeutfo on 23 October 2011, 21:46:12

In what way, while trying to drive straight, or under braking?

If you have set up print out post it up. Either a picture of it, or just quote the figures.

Title: Re: Car pulling to the left
Post by: Michael2.6 on 24 October 2011, 15:06:01

thanks for all the replys everyone.

here are the figures:
front camber left -1°43'
front camber right -1°56'

front toe left 0°06'
front toe right 0°04'

thanks