Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: azza_126 on 29 October 2011, 21:45:26

Title: headlights
Post by: azza_126 on 29 October 2011, 21:45:26

admin please move

i need a pair of headlights the car is a 94 model so pre facelift as headlights wont adjust and are aiming too low and there fairly misty on the lenses

Title: Re: headlights
Post by: skyblue on 29 October 2011, 22:45:32

You maybe better off looking on  ebay  for these as im sure the breakers on here only deal with the later models

Title: Re: headlights
Post by: albitz on 30 October 2011, 07:30:06

Facelift lights can be made to fit quite easily,just requires a little bit of trimming to a couple of pieces of plastic. ;)
I dont have any lights of any age for sale,but someone else probably will.Twiglet is breaking a few Omegas at the moment and RobG is talking about breaking his Elite estate. :y

Title: Re: headlights
Post by: sjc on 30 October 2011, 08:18:04

I've got a pair in excellent condition here - working motors, nice clear lenses.  Say, £45 including postage.

Title: Re: headlights
Post by: tunnie on 30 October 2011, 12:36:21

pre-facelift projectors will slot straight in & be a much better replacement than stock 94year  :)

Title: Re: headlights
Post by: azza_126 on 30 October 2011, 20:25:32

Projectors do they just plug in? Or any mods needed?

Title: Re: headlights
Post by: RobG on 30 October 2011, 20:29:47

Quote from: azza_126 on 30 October 2011, 20:25:32

Projectors do they just plug in? Or any mods needed?

Plug & play

Title: Re: headlights
Post by: azza_126 on 31 October 2011, 07:10:04

sorry sjc i didnt realise that projectors fitted so may i ask the question again has any one got any projector headlights for a prefacelift for sale?

Title: Re: headlights
Post by: sjc on 31 October 2011, 07:43:14

I'd go for projectors or xenons over the std candle-powered lights too - but, of course, xenons need the full leveling system so are much more work to fit but, as said already, projectors are plug and play.

Title: Re: headlights
Post by: azza_126 on 31 October 2011, 10:11:08

My dads old motor has full self leveling suspention do I need the hole lot or just the level sensors?

Title: Re: headlights
Post by: twiglet on 31 October 2011, 10:13:46

The level sensors on the NSF and NSR arms tell the headlight ECU (in OSF wing) what level the headlights need to be.  The self levelling suspension is a completely separate and un-related system.  :y

Title: Re: headlights
Post by: sjc on 31 October 2011, 10:49:02

Quote from: twiglet on 31 October 2011, 10:13:46

The level sensors on the NSF and NSR arms tell the headlight ECU (in OSF wing) what level the headlights need to be.  The self levelling suspension is a completely separate and un-related system.  :y

^ wot he said

So you'd need front and rear HEADLIGHT level sensors, headlight levelling ECU, all the wiring, plus of course, a pair of xenon lights.

Much easier to go for pair of projectors and put fresh bulbs in.

Title: Re: headlights
Post by: azza_126 on 31 October 2011, 17:49:39

Ok then has any one got a pair of projectors? :)

Title: Re: headlights
Post by: RobG on 31 October 2011, 17:59:17

Quote from: azza_126 on 31 October 2011, 17:49:39

Ok then has any one got a pair of projectors? :)

Got a good pair from a facelift if you want to make minor adjustments with a file :)

Title: Re: headlights
Post by: azza_126 on 31 October 2011, 23:30:01

how much? pm me

Title: Re: headlights
Post by: RobG on 01 November 2011, 15:25:52

Quote from: azza_126 on 31 October 2011, 23:30:01

how much? pm me

Done :)