Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: albitz on 02 November 2011, 00:14:12

Title: NCDC reassembly glitch.
Post by: albitz on 02 November 2011, 00:14:12

Finally almost reassembled my NCDC 2013 - hopefully properly this time. :-X
Only one problem,as I had it upside down this spring came out and I cant see where its supposed to go.I think it came from the area Ive marked in green.
Anyone know where it goes please ? Tia. :y

(http://i1238.photobucket.com/albums/ff500/Albs59/DSCF1221.jpg)

Title: Re: NCDC reassembly glitch.
Post by: VXL V6 on 02 November 2011, 19:41:21

Oh Bugger!

Hang on a sec, i'll edit your pic and draw on where it fits.

Title: Re: NCDC reassembly glitch.
Post by: TheBoy on 02 November 2011, 19:46:50

Saves me taking a photo ;D

Title: Re: NCDC reassembly glitch.
Post by: VXL V6 on 02 November 2011, 19:50:39

(http://i202.photobucket.com/albums/aa163/vxl_v6/DSCF1221MOD.jpg)

Title: Re: NCDC reassembly glitch.
Post by: albitz on 02 November 2011, 19:53:22

Anyone ?  :(

Title: Re: NCDC reassembly glitch.
Post by: VXL V6 on 02 November 2011, 19:54:07

Actually, should add the tail:-

(http://i202.photobucket.com/albums/aa163/vxl_v6/DSCF1221MOD2.jpg)

You need to flip the spring 180 degrees from the position it's in in your photo.

Title: Re: NCDC reassembly glitch.
Post by: TheBoy on 02 November 2011, 19:54:34

big blue dot strategically marked by Albs before removal?  Daft Irishman has a poor memory (that is pot calling kettle black ::)) ;D

Title: Re: NCDC reassembly glitch.
Post by: RobG on 02 November 2011, 19:55:26

Quote from: Albs on 02 November 2011, 19:53:22

Anyone ?  :(

look at the "enhanced" pic by Andy :P ::)

Title: Re: NCDC reassembly glitch.
Post by: albitz on 02 November 2011, 20:00:08

Quote from: TheBoy on 02 November 2011, 19:54:34

big blue dot strategically marked by Albs before removal?  Daft Irishman has a poor memory (that is pot calling kettle black ::)) ;D

Big blue dot was already there.Had no significance at all for me. ;D

Title: Re: NCDC reassembly glitch.
Post by: albitz on 02 November 2011, 20:01:21

Quote from: RobG on 02 November 2011, 19:55:26

Quote from: Albs on 02 November 2011, 19:53:22

Anyone ?  :(

look at the "enhanced" pic by Andy :P ::)

I didnt notice Andys post at all before asking "anyone ?"  :-[ ::)...........Im on nightshifts at the miniute,so I will blame that. :D

Title: Re: NCDC reassembly glitch.
Post by: albitz on 02 November 2011, 20:02:01

Quote from: VXL V6 on 02 November 2011, 19:54:07

Actually, should add the tail:-

(http://i202.photobucket.com/albums/aa163/vxl_v6/DSCF1221MOD2.jpg)

You need to flip the spring 180 degrees from the position it's in in your photo.

Andy - your a superstar.Thanks very much indeed. :y :y