Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: 05omegav6 on 10 November 2011, 20:23:23

Title: Check control module - Where is it?
Post by: 05omegav6 on 10 November 2011, 20:23:23

As above really :y

Would it be advisable to get the MID, module, and stalk from the same car? :-\

Title: Re: Check control module - Where is it?
Post by: freecall666 on 11 November 2011, 02:35:32

same for same, whats wrong with mid?

Title: Re: Check control module - Where is it?
Post by: TheBoy on 11 November 2011, 11:38:58

Quote from: freecall666 on 11 November 2011, 02:35:32

same for same, whats wrong with mid?

It's a tid ;)

Title: Re: Check control module - Where is it?
Post by: Andy H on 11 November 2011, 21:19:13

How does the lamp check work?

I am fairly certain that the full current to the lamps does not pass through the TID/MID/GID/CID because the pins on the grey plug look too small to me to carry the current.

Is there a dedicated lamp check module somewhere?

Title: Re: Check control module - Where is it?
Post by: RobG on 11 November 2011, 22:39:48

Quote from: Andy H on 11 November 2011, 21:19:13

How does the lamp check work?

I am fairly certain that the full current to the lamps does not pass through the TID/MID/GID/CID because the pins on the grey plug look too small to me to carry the current.

Is there a dedicated lamp check module somewhere?

Yep

Title: Re: Check control module - Where is it?
Post by: Andy H on 11 November 2011, 22:49:39

Quote from: RobG on 11 November 2011, 22:39:48

Quote from: Andy H on 11 November 2011, 21:19:13

How does the lamp check work?

I am fairly certain that the full current to the lamps does not pass through the TID/MID/GID/CID because the pins on the grey plug look too small to me to carry the current.

Is there a dedicated lamp check module somewhere?

Yep

Hmmm. Haynes says "P25 Bulb failure sensor".

The diagram is too small to read without assistance  :( if I can find some reading glasses  ::) I want to see how many wires link it to the check control (TID/MID/GID/CID)

Title: Re: Check control module - Where is it?
Post by: RobG on 11 November 2011, 22:51:09

Module is up behind pass. glovebox

Title: Re: Check control module - Where is it?
Post by: Andy H on 11 November 2011, 23:20:58

Quote from: Andy H on 11 November 2011, 22:49:39

Quote from: RobG on 11 November 2011, 22:39:48

Quote from: Andy H on 11 November 2011, 21:19:13

How does the lamp check work?

I am fairly certain that the full current to the lamps does not pass through the TID/MID/GID/CID because the pins on the grey plug look too small to me to carry the current.

Is there a dedicated lamp check module somewhere?

Yep

Hmmm. Haynes says "P25 Bulb failure sensor".

The diagram is too small to read without assistance  :( if I can find some reading glasses  ::) I want to see how many wires link it to the check control (TID/MID/GID/CID)

3 wires.

Title: Re: Check control module - Where is it?
Post by: 05omegav6 on 11 November 2011, 23:25:57

Quote from: RobG on 11 November 2011, 22:51:09

Module is up behind pass. glovebox

Cheers Rob :y Is it bolted to the A post :-\ or is it buried behind the heater gubbins? :-\

Quote from: Andy H on 11 November 2011, 22:49:39

Quote from: RobG on 11 November 2011, 22:39:48

Quote from: Andy H on 11 November 2011, 21:19:13

How does the lamp check work?

I am fairly certain that the full current to the lamps does not pass through the TID/MID/GID/CID because the pins on the grey plug look too small to me to carry the current.

Is there a dedicated lamp check module somewhere?

Yep

Hmmm. Haynes says "P25 Bulb failure sensor".

The diagram is too small to read without assistance  :( if I can find some reading glasses  ::) I want to see how many wires link it to the check control (TID/MID/GID/CID)

Thanks Andy :y If worse comes to it, I can try and play follow the wires... ::)

Title: Re: Check control module - Where is it?
Post by: RobG on 12 November 2011, 14:44:45

Quote from: taxi al on 11 November 2011, 23:25:57

Quote from: RobG on 11 November 2011, 22:51:09

Module is up behind pass. glovebox

Cheers Rob :y Is it bolted to the A post :-\ or is it buried behind the heater gubbins? :-\

Quote from: Andy H on 11 November 2011, 22:49:39

Quote from: RobG on 11 November 2011, 22:39:48

Quote from: Andy H on 11 November 2011, 21:19:13

How does the lamp check work?

I am fairly certain that the full current to the lamps does not pass through the TID/MID/GID/CID because the pins on the grey plug look too small to me to carry the current.

Is there a dedicated lamp check module somewhere?

Yep

Hmmm. Haynes says "P25 Bulb failure sensor".

The diagram is too small to read without assistance  :( if I can find some reading glasses  ::) I want to see how many wires link it to the check control (TID/MID/GID/CID)

Thanks Andy :y If worse comes to it, I can try and play follow the wires... ::)

Glovebox out jobbie

Title: Re: Check control module - Where is it?
Post by: 05omegav6 on 13 November 2011, 18:13:43

Oh joy ::)