Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: rajveer.sandhu on 10 November 2011, 22:58:35

Title: Deep Dish alloy fitment
Post by: rajveer.sandhu on 10 November 2011, 22:58:35

Hi,

Would the following fit an Omega Facelift Elite:

R 17
2-10J
2-8.5J
5x110 (May Fit 5x112 with variable bolts).
et - unsure but can find out?
Tyres - unsure but can find out?

OR

R 16
2-9J
2-9J
5x112
et 15
4 x 215 40 R16

Thanks

Title: Re: Deep Dish alloy fitment
Post by: aaronjb on 10 November 2011, 23:22:33

The first might, though the rears are very wide. PCD is right (5x110), but you'd need to know the offset and tyre sizes.

Second won't - PCD is wrong, offset is far too small, tyres are way too narrow for 9J rims unless you want the 'Euro look'

Title: Re: Deep Dish alloy fitment
Post by: Mr Gav on 13 November 2011, 11:05:19

I reckon you`d struggle to get 10J rims under the rear arches without rolling them, I have some 8J Azevs with an ET37 and there`s only about 15mm clearance of the arches.
Aaronjb is right about the 215`s being too small for the 9J rims,I have 235`s on my Azevs which i just about right, I`ve tried 225`s but they`re just that bit too small.