Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Bionic on 11 November 2011, 10:17:21

Title: V6 EcoTec engine temperature sensors.
Post by: Bionic on 11 November 2011, 10:17:21

Now that I have done just about eveything that can be done I am told that it might just be the temperature sender which sends a signal to the ECU.
Apparently there are 2, one for the temperture guage and the other to the ECU so I see the logic in that it might just be the cause of my woes.
Question?
If there is such a temperature sender sending its signal to the ECU where is it?  ::)

Title: Re: V6 EcoTec engine temperature sensors.
Post by: RobG on 11 November 2011, 10:31:55

http://www.omegaowners.com/forum/index.php?topic=95627.0

Title: Re: V6 EcoTec engine temperature sensors.
Post by: amba on 11 November 2011, 12:13:36

Both a located on the coolant bridge. :y

Title: Re: V6 EcoTec engine temperature sensors.
Post by: Bionic on 11 November 2011, 17:56:06

 ;D ;D ;D Unless it was a typo now all I need to find is a 199mm open ender....should I try the railways? ;)

Title: Re: V6 EcoTec engine temperature sensors.
Post by: amba on 11 November 2011, 18:12:46

Isambard Kingdom Brunel is your man  :y

Title: Re: V6 EcoTec engine temperature sensors.
Post by: Bionic on 12 November 2011, 04:45:34

 ;) Is he good with migs then?

Title: Re: V6 EcoTec engine temperature sensors.
Post by: amba on 12 November 2011, 08:46:48

Don,t know   :D....But he was bloody good with "Bridges " ;D ;D ;D