Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: jamescdxv6 on 13 November 2011, 21:44:19
-
hi anybody have a clue how to put codes into a radio
the numberson my sterio go upto 6 but the numbers in my code are higher than this
any advice would be apreciated
-
Which model stereo ?? .. will say so on the front ... CDR700 or NCDC2013 or something totally different .. but it WILL say what it is .. and that information will save numerous guesses .. :)
-
will nip out and look and post it on
cheers :y
-
Ensure radio is OFF. Turn ign. ON. Turn radio on whilst holding "AS" button on fascia until you hear a beep. Display will say "CODE" then will show 4 dashes. Input code using station preset numbers1,2,3 & 4. EG. if code is 1234 press button 1 twice (first press = 0), press button 2 three times, button 4 four times, you get the gist. When code is entered press "AS" button again, when you hear the beep, release "AS". Job done
-
is ccr 2006
thanks rob
-
I had the same quandary until I saw the guide :-[
-
Manual can be found here, pages 18 and 19 dealing with the code.
http://foto.opel-club.ru/albums/userpics/10054/ccr2006_2002.pdf
-
Did you get sorted James?
-
I had the same quandary until I saw the guide :-[
And another problem I had was not reading the carpass properly :-[
-
not tried it yet mate
bloody battery went dead arhhhhhhhhhhhh
thanks though big help :y
-
got radio sorted
thanks to all
easy when you know how lol
cheers guys :y ;D
-
easy when you know how lol
Absolutely!! ;D
Glad you got sorted :y
-
thanks mate
u were a big help :y