Omega Owners Forum

Chat Area => General Car Chat => Topic started by: hoofing it on 15 November 2011, 20:21:34

Title: parts for SennyA
Post by: hoofing it on 15 November 2011, 20:21:34

Hi all
Back in August I think it was on here I got a link from a member to a German website that  still supplies parts for Senator A's but ive lost the e-mail.
Ive also made a plea on the ABS forum.
Can anyone help :) :y
 

Title: Re: parts for SennyA
Post by: 2woody on 16 November 2011, 09:00:36

what you after ?

Title: Re: parts for SennyA
Post by: hoofing it on 16 November 2011, 09:24:51

Diff seals,rear wheel bearings(these are easy to get) the diff seals are dam near impossible,but I got an e-mail from someone with a German company who still make and supply all parts for opel senny A's.
Ive also tried to source a poly bush kit for it to no joy I even phoned bearmach directly.
Even trying to get front brake discs was hard as there an oddball size but the rears are the same as the mig :o.
I might try e-bay germany ;)

Title: Re: parts for SennyA
Post by: hoofing it on 16 November 2011, 09:40:43

Found It here's the e-bay address.
http://stores.ebay.de/Opel-Classic-Parts-Center

Title: Re: parts for SennyA
Post by: 2woody on 17 November 2011, 15:28:28

Diff seals I can probably do - it's a seal supplier job like RS or Grammer

Rear discs are definitely not the same. Different diameter and different wheel bolt pcd.

I suspect you're suffering from a Senator A / Senator B, Omega A / Omega B issue.

No suspension bushes the same as Omega B, but could be similar to some Ascona parts.

I've just re-engineered an Omega A front subframe into a Monza for that exact reason.

Title: Re: parts for SennyA
Post by: hoofing it on 17 November 2011, 17:23:39

Quote from: 2woody on 17 November 2011, 15:28:28

Diff seals I can probably do - it's a seal supplier job like RS or Grammer

Rear discs are definitely not the same. Different diameter and different wheel bolt pcd.

I suspect you're suffering from a Senator A / Senator B, Omega A / Omega B issue.

No suspension bushes the same as Omega B, but could be similar to some Ascona parts.

I've just re-engineered an Omega A front subframe into a Monza for that exact reason.

I'll keep you in mind for the seals ive had one c**t of a day all that can go wrong has with my disco.Leak at fuel tank(sender unit pipes corroded £100 fix) and it won't start wire to starter burnt out and my thrust bearing collapsed.
The senny is going to have to wait until after christmas

Title: Re: parts for SennyA
Post by: 2woody on 18 November 2011, 08:53:50

What kind of Disco ?

have just scrapped a Range Rover and have two spare fuel tanks if needed.

Title: Re: parts for SennyA
Post by: hoofing it on 18 November 2011, 21:09:39

Thanks for the offer mate :y it was the fuel sender on a Disco 300tdi (corroded pipes).
I had a spare sender that I got from flee-bay and to top off a bad week the thrust bearing gave up in Mcdonalds drive through  ;D ;D ;D ;D.
just finished fitting a new one(4hrs)