Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: jamescdxv6 on 17 November 2011, 21:33:30
-
was just wondering if anyone can help me again lol
my cr 2006 cd player wont work when u put magazine in it says check magazine
anyone know how to fix this
thanks
-
How long does it say Check Magazine for?
-
havent really noticed as i tend either to pull it out and try again or just switch to radio
should i check would that make a iffeence
thaks
-
havent really noticed as i tend either to pull it out and try again or just switch to radio
should i check would that make a iffeence
thaks
please ;)
-
stays on constant untill you change it
cheers
-
Never goes to 'Check 4' ?
-
no just saying check magazine
chers
-
tell a lie
just tried again and this time came up check4
-
tell a lie
just tried again and this time came up check4
How long before it changes to Check 3
-
tell a lie
just tried again and this time came up check4
How long before it changes to Check 3
This could be a long post! ::) ::) ::)
-
sitting looking at it now and it has changedback to check magazine about 2 mins ago
and has stayed on that since
cheers
-
still on check magazine and hasnt changed atall
-
Mine took ages to check the mag after I had loaded it for the first time after buying the car. I took it back out and put a lens cleaning disk in and let it do its job. After it had finished, about 10 secs, I put the first disk back in and it worked ok after that.
Have you tried to clean the laser lens? if not, give it a go..... ;)
-
The fact its not going to CHECK 3 leads me to suspect that its NOT a laser problem, but a mechanism problem.
-
tell a lie
just tried again and this time came up check4
How long before it changes to Check 3
This could be a long post! ::) ::) ::)
Sometimes 1 step at a time, as when in headless chicken mode, not all members follow a long sequence of instructions :-X
-
Mine took ages to check the mag after I had loaded it for the first time after buying the car. I took it back out and put a lens cleaning disk in and let it do its job. After it had finished, about 10 secs, I put the first disk back in and it worked ok after that.
Have you tried to clean the laser lens? if not, give it a go..... ;)
Different fault ;)
I cannot recommend laser cleaning with those silly cleaning disks until we know, beyond any doubt, that its the laser thats shafted. 99.9% of the time, those stupid disks will do far more damage than good. And I, personally, do not want to suggest something that will cause damage to someone else's property ;)
-
Genuine or recordable discs ?
-
do you think i should replace the magazine
watched itfor about an hour last night and just stayed on check magazine
thanks
-
do you think i should replace the magazine
watched itfor about an hour last night and just stayed on check magazine
thanks
Unless the mag shows signs of damage, I suspect its the CDC3 mech thats faulty. Sorry.
-
that mean its completely bugerred
cheers
-
:y
-
Typical :-\
-
i know mate
always the same for me lol
nothing straight forward