Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: footloose on 21 November 2011, 18:54:37

Title: Fitting standard shocks to an omega 3lt
Post by: footloose on 21 November 2011, 18:54:37

Hellow. When i fit the new standard shocks i have to disconnect the air pipes and remove the self leveling fuse. Will i get fault codes and a warning light on the dash display?
Iv'e just got the car through the MOT but i did wipe off the oil from the leaking shock before i took it in so i thought i would change em anyway.
Thanks for any advice.

Title: Re: Fitting standard shocks to an omega 3lt
Post by: TheBoy on 21 November 2011, 18:55:12

no

Title: Re: Fitting standard shocks to an omega 3lt
Post by: albitz on 21 November 2011, 18:55:37

Just pull the fuse (27?) and then change the shocks. :y

Title: Re: Fitting standard shocks to an omega 3lt
Post by: footloose on 21 November 2011, 18:56:51

Thanks. The Boy. :y :y

Title: Re: Fitting standard shocks to an omega 3lt
Post by: footloose on 21 November 2011, 18:59:11

And every one else that answers. :y :y