Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: albitz on 21 November 2011, 22:11:53

Title: Master cylinder compatibility.
Post by: albitz on 21 November 2011, 22:11:53

Star Whites needs a master cylinder urgently, as per this wanted thread. I have one but just want to be certain its suitable so I can send it off to him asap. Can anyone confirm please ? Tia.  :y
http://www.omegaowners.com/forum/index.php?topic=96054.new#new

Title: Re: Master cylinder compatibility.
Post by: RobG on 21 November 2011, 22:32:32

Read my post in your link :P As long as bore size (cast numbers) is the same it`ll be OK

Title: Re: Master cylinder compatibility.
Post by: 2woody on 22 November 2011, 14:31:44

there are two master cylinders fitted to Omega B

The first type is for front/rear split brakes. 25mm front circuit bore, 20mm rear circuit bore - numbers which are cast into the housing of the cylinder.

The second type is for the later diagonal split brakes, 25mm front bore, 25mm rear bore. This type also has a different servo.

Change point about 1996